Direct answer: Compact 4 Burner Gas Electric Stove 6024HD2 is a tabletop mixed-zone cooker for importers, distributors, wholesalers and private-label buyers comparing four-position cookers. It uses 2 gas burners + 2 electric hot plates and measures 490 × 544 × 263 mm according to the supplied catalog. Final gas, electrical, compliance and market-use details remain subject to order-specific confirmation. Model 6024HD2 combines two visible gas burners with two solid hotplate-style cooking zones in a compact tabletop body. The short rear guard keeps the unit visually open while the four front controls separate the cooking positions.

Compact 4 burner gas electric stove: Product Definition

6024HD2 is a tabletop mixed-zone cooker identified by four independently presented cooking positions and the visible structure shown in the supplied product image. It is supplied as a tabletop-format appliance, so buyers should compare the body footprint, rear protection and required installation surface with their channel needs. Its four-position count combines gas and electric cooking: 2 gas burners + 2 electric hot plates. This is not an all-gas cooker, and the electrical specification must be approved together with the gas specification.

Confirmed Product Information for 6024HD2

6024HD2 is identified as a tabletop mixed-zone cooker with 2 gas burners + 2 electric hot plates. The supplied image shows a tabletop body with a short rear guard, while the catalog lists the product size as 490 × 544 × 263 mm. The catalog lists a net/gross weight basis of 5.74 kg / 6.25 kg. The color box is listed as 500 × 155 × 560 mm. The packing statement is 515 × 485 × 575 mm, with 1 unit per carton and a reference loading quantity of 1,404 pcs (40HQ reference). These figures help buyers conduct an initial model and logistics review; the concise specification table remains in the product summary above.

Features That Matter in Procurement

2 gas burners + 2 electric hot plates layout

Buyer benefit: Four cooking positions give buyers a clear capacity point while preserving the exact energy mix of this model. Procurement value: Document both electrical and gas ratings on the specification, rating label and manual; approving only the visible burner count is not sufficient.

Short rear guard

Buyer benefit: The low guard preserves an open tabletop profile while distinguishing this body from full-cover models. Procurement value: Confirm its height, finish and attachment on the approved sample so listing images and cartons match the production revision.

Tabletop body

Buyer benefit: The cooker can be evaluated for channels that sell countertop-format appliances rather than integrated floor stands. Procurement value: Confirm the intended supporting surface, clearances and installation instructions for the destination market before launch.

Product Range and Buyer Search Context

Range planners may compare it with a mixed-zone tabletop cooker, a two gas burner cooker, or another dual solid hotplate stove. The comparison should preserve the exact cooking-zone mix and rear structure instead of grouping every four-position tabletop cooker as the same item. 6024HD2 should be presented as a four-burner product because it provides four cooking positions. However, its listing must also state 2 gas burners + 2 electric hot plates so buyers can distinguish an all-gas cooker from a gas-electric combination stove before requesting a quotation.

Who Should Evaluate 6024HD2?

6024HD2 is intended for importers, wholesalers, retail chains and appliance brands comparing compact four-position tabletop formats. The model can be assessed as part of a range that needs a clearly differentiated gas and electric cooking mix.

• Regional appliance distribution programs that can support both gas and electrical compliance requirements.
• Private-label assortments that need the exact gas-to-hotplate balance shown for this model.
• Wholesale projects where carton data, labels and manuals will be approved before production.

Suitability is conditional on the final gas, electrical, installation and compliance configuration for the destination market.

How This Model Compares Within the 6024 Series

6024HD2 differs from HD1 by adding a second electric hot plate and reducing the gas count from three to two. It differs from D2-2 through its short rear guard rather than a full hinged cover. The better choice depends on the approved energy configuration, required format, destination rules and packing method—not on burner count alone.

What Buyers Should Confirm Before Ordering

1. Confirm the voltage, frequency, plug and wattage for both electric hot plates.
2. Specify the gas family, supply pressure and required burner ratings for the destination.
3. Approve the short rear guard and four-control panel shown in the product image.
4. Confirm voltage, frequency, plug or cord format and the rated input of each electric hot plate.
5. State the destination market and identify the required product, label, manual and packaging compliance documents.
6. Approve a production-representative sample before final artwork and mass production.

How Should Buyers Read the Packing Data?

The catalog supplies a complete product, color-box, and outer-packing dimension set. It also lists one unit per carton and a 40HQ reference quantity. Buyers can use these figures for an initial packing review, but final loading plans should still be based on an approved production packing specification. Reference loading quantities are catalog planning figures, not a freight guarantee. Final booking should use the approved production pack-out, shipment ratio and logistics provider calculation.

RFQ Checklist for 6024HD2

A useful quotation request should define the product revision as well as the quantity. Send the following details so ECOBRIDGE can review technical and commercial feasibility.

• Model and configuration: 6024HD2, 2 gas burners + 2 electric hot plates.
• Target market: country, sales region and intended distribution channel.
• Required quantity: trial order quantity and expected repeat-order volume.
• Gas requirement: gas family, nominal pressure, connection and requested burner ratings.
• Electrical requirement: voltage, frequency, plug or cord format and hotplate input.
• Compliance brief: applicable destination documents, testing or labeling requirements.
• Branding scope: logo, rating label, control graphics, language and manual requirements.
• Packaging brief: carton artwork, protection method, shipping marks and pack-out approval.
• Trade information: delivery port, requested commercial terms and target schedule.

Sample Approval Checklist

Before mass production, the buyer should review a sample built to the proposed order specification. The review should record measurable acceptance points rather than rely only on appearance.

• Cooking-position layout and control correspondence
• Cover or rear-guard alignment and finish
• Pan-support seating and burner-part fit
• Electric hotplate surface and control marking
• Product dimensions and carton contents
• Rating-label data, instructions and packaging artwork

OEM and Private-Label Project Scope

For an OEM or ODM enquiry, buyers can ask ECOBRIDGE to evaluate logo placement, control-panel graphics, rating labels, instructions, carton printing, visible finish and market-specific electrical or gas configuration. Availability depends on the selected production configuration, order requirements, technical review and project feasibility. Private-label approval should link one model code to one controlled specification. Product photos, the sample, bill of materials, rating label, manual and carton should all describe the same 2 gas burners + 2 electric hot plates version.

Quality-Control Considerations

Typical inspection points for this configuration may include gas leakage, burner fitting, flame stability under the specified gas conditions, electric hotplate operation at the approved electrical rating, control correspondence, surface inspection and protective packing. The actual inspection plan, sampling level and acceptance criteria should be agreed for the order rather than inferred from this product page. For stand models, the buyer should also define assembly and stability checks. For every version, test conditions must match the approved gas and electrical specification.

To Be Confirmed During RFQ

The available sheet does not state voltage, frequency, hotplate wattage, gas family, pressure, burner heat input, ignition system, inlet arrangement, or safety devices. Confirm these market-specific items before approving labels, manuals, quotations, or compliance claims. No certification, market approval, performance value or unrestricted operating environment is claimed until supporting documents for the ordered configuration have been reviewed.

Related Sourcing Resources

• four burner gas stove range
• tabletop stove and cooktop buyer guide
• LPG and natural gas sourcing guide

For an EU destination, buyers can consult Regulation (EU) 2016/426 on appliances burning gaseous fuels as an authority source. This reference does not state that 6024HD2 is certified or approved for the EU; applicable requirements and evidence remain to be confirmed for the ordered version.

6024HD2 Buyer FAQ

How is the four-burner layout configured?

6024HD2 has two visible gas burners and two electric hot plates. The final electrical and gas ratings must be stated in the order specification.

Why choose 6024HD2 instead of 6024D2-2?

Both use a two-gas and two-hotplate arrangement, but 6024HD2 shows a short rear guard while 6024D2-2 has a full hinged cover.

Which packing figure should buyers use first?

The catalog lists a 515 × 485 × 575 mm packing size and one unit per carton. Confirm the production carton before calculating final freight.

What defines the compact 4 burner gas electric stove?

6024HD2 is defined by four visible cooking positions arranged as 2 gas burners + 2 electric hot plates, together with its tabletop body with a short rear guard. This phrase identifies the product format and visible energy layout; it does not establish unconfirmed burner output, gas compatibility, electrical rating, certification or installation approval. Those details must be specified and verified for the order.

Can the electrical and gas configuration be selected for a destination market?

The required voltage, frequency, plug or cord, hotplate input, gas family, pressure and connection should be stated in the RFQ. ECOBRIDGE must review feasibility and confirm the exact production specification. The visible four-position arrangement does not prove that every electrical or gas option is available.

Is OEM or private-label supply automatically included?

No. Buyers may submit logo, label, manual, control-panel and carton requirements for project evaluation. Approval depends on the selected configuration, technical feasibility, commercial terms and sample confirmation. Do not release retail artwork until one controlled model specification has been agreed.

Request a Configuration-Based Quote for 6024HD2

Send the destination, forecast quantity, electrical standard and gas requirements to receive a configuration-based quotation for 6024HD2. Request a quote from ECOBRIDGE and reference model 6024HD2.