Before approving a gas stove ignition configuration, identify its power source, the parts supplied with it, the behavior described in its instructions and any separate flame-safety function. A quotation that offers several ignition voltages still leaves the buyer with a selection to make.
This matters when an importer approves a showroom sample, a distributor prepares installation information or a private-label buyer releases the version that will reach retailers. The useful outcome is one configuration that the next person can identify and use with the matching instructions.
Start with the choice in the product description
On the ECOBRIDGE 6504S-1 product page checked on November 12, 2026, the gas and ignition section lists 1.5 V, 110 V and 220 V ignition choices, alongside a safety-valve option. The same page identifies 6504S-1 as the cast-iron-pan-support variant. These details identify questions for the quotation. The fitted ignition supply and safety option remain order-specific. ECOBRIDGE 6504S-1 product reference.
A buyer requesting this model should select the intended ignition supply in the quotation response. The supplier can then identify the proposed parts and instructions for that choice. For a proposed battery version, the response should describe the actual battery arrangement. For a version powered from an electrical installation, it should identify the rated supply and connection requirements.
Keep the fuel specification in the product file as well. Choosing an ignition voltage leaves the gas family, pressure and other gas-system details to be resolved through their applicable specifications.
Choose the supply from the installation brief
The first selection belongs in the buying brief, before the sample request. Eltec’s OEM ignition selection guide starts with the available power source and electrical environment. It also identifies battery replacement as a trade-off of battery-powered designs. For an importer, translate that engineering question into three purchasing checks:
- No appliance electrical connection is planned: request a battery-fed proposal and its complete cell and holder arrangement. Include access for replacement in the installation review.
- A mains connection is intended: specify the destination electrical supply in the enquiry and obtain the proposed appliance’s rated input and connection instructions. Keep 110 V and 220 V offers as separate configurations until reviewed.
- Use during a power interruption is part of the sales brief: obtain the exact instructions and identify which functions remain available. Review starting ignition, re-ignition and flame safety individually before making the claim.
These checks select what to ask the supplier to quote. The ordered appliance and its instructions must establish the final configuration. The manual examples below show why a voltage label alone cannot complete that choice.
Read the battery description beyond the voltage
Two manufacturer instructions illustrate why a battery voltage alone leaves a practical gap. Rinnai’s RI-712 Si / RI-712 iX manual specifies one 1.5 V C-size cell and shows the compartment at the rear right. ELBA’s gas-hob manual 90-400 describes the battery-equipped versions with a 1.5 V AA cell and a holder fixed to the cabinet. These descriptions apply to those manufacturers’ products. An ECOBRIDGE proposal needs its own cell and holder details. Rinnai installation and specification sections, ELBA battery ignition supply section.
| Source example | Battery specified | Holder arrangement in the instructions | Buyer handoff |
|---|---|---|---|
| Rinnai RI-712 Si / RI-712 iX | One 1.5 V C-size cell | Compartment at the rear right | Retain the complete cell designation when preparing support information. |
| ELBA manual 90-400, battery-equipped versions | 1.5 V AA cell | Holder fixed to the cabinet | Include the holder arrangement in the installation handoff. |
For a proposed battery version, record the cell designation, number of cells, holder location and how the user reaches it after installation. Establish whether the cell and holder are included in the quoted pack. The receiving team can then compare the delivered contents with a definite expectation.
A tabletop product with a rear compartment and a built-in product with an external holder create different handoffs. In the latter case, the installation information must explain the holder arrangement. A retail description that only says “battery ignition” leaves that work for the installer or customer.
Ask for a photograph of the proposed arrangement and the corresponding instruction page. Use them together. A close-up identifies the visible holder, while the instructions establish the intended access, polarity and replacement method for that model.
Record three functions during sample approval
Use three lines in the approval notes. Record what produces the starting spark, whether the appliance has a re-ignition feature, and what the specified safety system does when a flame goes out. Each question leads to different evidence.
Bosch’s manual for the PN.6B.G..I / PN.7B.G..I / PN.9B.G..I family describes automatic ignition and the thermocouple safety system in separate subsections. It identifies the ignition plug and thermocouple separately in the burner diagram. This gives the buyer a concrete reading method. Locate each stated function and its component in the exact manual to complete the description behind an “automatic ignition” label. Bosch manual, burner diagram and sections 5.1–5.2.
Power-interruption behavior needs its own entry. The Miele range manual reviewed here states that automatic re-ignition will not work properly during a power failure and gives instructions for the specified cooktop burners. A buyer preparing claims about operation during an outage needs the equivalent instructions for the ordered appliance. Miele manual, printed page 32.
For an OEM sample review, ask the supplier for a demonstration plan consistent with the approved instructions and technical requirements. Record the demonstrated functions and open points. Technical testing involving gas supply, failed ignition or flame loss belongs with appropriately qualified personnel using the applicable procedure. Acceptance criteria belong in that agreed technical plan.
A worked quotation review
The following is a fictional buyer exercise. A distributor requests battery-powered ignition for a proposed 6504S-1 order. Its retail brief provides no appliance electrical connection for the hob. The offer repeats the three voltage choices from the product reference. No order-specific holder, cell specification or manual has been supplied.
The buyer can take a specific action. Return the offer for a single selected configuration and request the missing items below before approving a production configuration. The exercise makes no claim about a configuration currently available from ECOBRIDGE.
| Item | What the exercise has | What would close the point |
|---|---|---|
| Ignition supply | Buyer requests battery power. Offer lists three voltage choices. | Supplier identifies the exact proposed battery configuration in the quotation. |
| Cell and holder | Cell type, quantity and location are open. | Component description, arrangement photo and instruction page agree. |
| Pack contents | Cell and holder inclusion are open. | Quote and packing list state which parts are supplied. |
| Functions | Ignition and any selected safety option require a model-level description. | Exact instructions and sample-review results identify the fitted functions. |
| Approval result | Configuration selection remains open. | Buyer identifies the selected version and assesses the sample against it. |
If the supplier proposes a mains-powered version, review it as a changed offer. Resolve the required electrical supply and connection before accepting that version for the project. Include the parts and installation information needed for the selected arrangement in the commercial comparison.
Use a short handoff record
The approval record should let a person who missed the quotation discussion identify the ignition arrangement. A distributor can add these fields to its gas stove specification sheet.
- Ordered model and variant, quotation reference and selected ignition supply.
- Battery cell designation and quantity, holder arrangement and included parts, where applicable.
- Rated electrical supply and connection description for a mains-powered proposal.
- Manual page and revision covering normal ignition, any re-ignition function and power interruption.
- Description of each selected flame-safety function and the evidence reviewed.
- Sample reference, review date, unresolved point and person responsible for closing it.
Give the agreed arrangement to the person preparing retail instructions and to the person building the spare-parts plan. They can identify the holder, ignition components and manual revision before retail launch.
For an ECOBRIDGE enquiry, send the model, destination, desired ignition supply and installation context. Ask for a quotation that identifies the proposed arrangement and corresponding documents. This provides a usable starting point for selecting and reviewing the sample.
Source notes
The ECOBRIDGE product reference was checked on November 12, 2026. The Rinnai, Bosch and Miele sections were reread on November 11. An accessible ELBA manual covering battery-equipped versions was read on November 11 to replace the earlier inaccessible PDF. Manufacturer examples apply to the models and versions in those instructions.
- ECOBRIDGE 6504S-1 product reference.
- Rinnai RI-712 Si / RI-712 iX instructions, installation and battery sections.
- ELBA 90-400 installation and use instructions, battery ignition supply section.
- Bosch PN-family user manual, burner diagram and sections 5.1–5.2.
- Miele range instructions, printed page 32.
- Eltec OEM ignition selection guide, power-source selection and separate flame-sensing discussion; read November 12, 2026.