Quick answer: ECOBRIDGE
kitchen gas stove 3 burner 6023J is a freestanding open rack 3-zone gas cooker with a full ribbed cover. Its catalog-listed product size is
598 × 334 × 745 mm, and reference loading is
629 / 1,536 pcs for 20GP / 40HQ. 6023J combines a 745 mm open rack with a full ribbed cover, creating a more enclosed retail presentation than the short-guard HJ version.
The Full Ribbed Cover Creates a Different Retail Tier
Model 6023J is a
kitchen gas stove 3 burner format mounted on an open rack and finished with a full-width ribbed cover. The cover gives the product a more enclosed upper silhouette than 6023HJ while preserving the visible two-tier storage frame below.
For distributors, that difference can support a separate catalog position. The cover may appeal to buyers who want the cooking deck visually contained when the unit is not in use, but its final function, hinge arrangement, coating, and closing clearances should be confirmed on the approved sample.
A 745 mm Overall Height Should Be Treated as a Planning Dimension
The catalog lists 598 × 334 × 745 mm for the assembled product. That figure matters for product photography, showroom display, carton planning, and user instructions. It also allows a direct comparison with the taller 780 mm 6023HJ.
Buyers should verify the finished height after assembly and confirm whether feet, frame tolerances, or optional parts change the measurement. A stand-based cooker should be evaluated as a complete structure rather than as a burner deck and a separate rack.
The 170 mm Package Reflects the Added Cover Structure
6023J is listed in a 603 × 170 × 405 mm single-unit package with reference loading of 629 / 1,536 pieces. Its nominal cube is approximately 0.0415 m³. This is larger than the short-guard HJ carton and smaller than the perforated-cover GJ carton.
That middle position can be useful when a buyer wants more visual enclosure than HJ without accepting the largest package in the family. Final landed-cost comparisons should use approved packaging, not only the preliminary loading table.
Treat the Frame, Cover, and Cooker as One Quality-Control System
Inspection should cover burner and control correspondence, gas leakage, flame behavior, pan-support fit, cover alignment, hinge movement, frame fasteners, shelf installation, leg stability, coating, and accessory count. Each area affects the user experience even though the product is often marketed primarily by burner number.
A golden sample should include the final front-panel graphics, labels, manual, cover finish, hardware pack, and carton protection. This gives production and inspection teams a concrete reference for both appearance and assembly.
European Buyers Need a Defined Configuration Before Artwork
The official
EU Gas Appliances Regulation can help European importers identify the responsibilities, conformity work, documentation, and instructions that may apply to appliances burning gaseous fuels. It is not evidence that 6023J already satisfies a specific market requirement.
Artwork should begin only after the gas family, pressure, injector, burner output, ignition, safety components, rating information, and language requirements are agreed. Otherwise, late technical changes can force label and packaging revisions.
Closed-Cover Presentation Should Be Verified on the Golden Sample
The ribbed cover gives 6023J a strong closed appearance, but the catalog image mainly shows it raised. The golden sample should confirm how the cover rests when closed, whether it clears the pan supports and burners, how the hinge behaves, and whether labels or graphics remain visible in both positions.
Retail photography can then show the correct open and closed states. This avoids using a generic cover image that does not match the shipped product.
After-Sales Identification for a Multi-Part Product
A freestanding cooker may require replacement of knobs, pan supports, feet, fasteners, shelves, or other parts. The manual and service file should identify the model and component references clearly so distributors can resolve after-sales requests without confusing 6023J with HJ or GJ.
Consistent model markings on the cooker, carton, manual, and spare-parts list also make repeat orders easier to control.
Convert the Catalog Model Into a Market-Specific Specification
The image and dimensions establish the physical identity of 6023J, but they do not define the complete gas system. Before a quotation is finalized, the buyer should state the destination country, gas family, supply pressure, injector specification, target burner outputs, ignition method, gas inlet, regulator or hose expectations, and any required safety components.
The approved specification should control the sample, rating label, manual, carton, inspection checklist, and public product information. When those documents use the same model data, distributors are less likely to face mismatched claims or late artwork changes.
Use the Packing Data to Model Landed Cost
The calculated nominal packed volume is
0.0415 m³ per cooker based on the supplied packing dimensions and 1 piece(s) per carton. This is a model-comparison figure only. Production carton tolerances, inserts, accessory bundles, pallet use, and the loading method can change actual utilization.
The supplied loading reference is
629 / 1,536 pcs for 20GP / 40HQ. Treat it as a preliminary planning value. Confirm the finished packaging and loading plan before using the quantity in a purchase budget or customer quotation.
Private-Label Decisions That Should Be Locked Before Production
OEM development may cover front-panel graphics, logo position, knob appearance, cover finish, rating labels, warnings, user-manual language, retail-box artwork, barcode placement, master-carton marks, and accessory presentation. Each change should be checked for cost, lead time, packing impact, and consistency with the approved gas configuration.
A branded golden sample is more useful than a generic reference sample. It lets the buyer, production team, and inspectors evaluate the exact version that will reach the market.
Quality Control Should Follow the Product Structure
A practical inspection plan for 6023J should cover incoming components, gas leakage, burner and knob correspondence, flame adjustment, ignition where specified, pan-support seating, cover or guard alignment, coating, labels, accessories, packing, and final appearance.
Stand-based models also need hardware count, frame alignment, shelf installation, stability, and assembly checks. Tabletop models need stable feet and confirmation that the supporting-surface instructions are clear.
Compare 6023J With Related ECOBRIDGE Models
Buyers can compare
3 Burner Outdoor Gas Stove With Stand 6023HJ and
Outdoor 3 Burner Gas Stove With Stand 6023GJ. The
Three Burner Gas Stove collection provides the parent range, while the
ECOBRIDGE Gas Stove Supplier program supports broader OEM and multi-model sourcing discussions.
A useful comparison keeps burner count constant and examines installation format, body dimensions, cover treatment, pieces per carton, packed cube, loading density, assembly work, and target channel. This prevents appearance alone from controlling the sourcing decision.
Information to Send for a Model-Specific Quotation
- Destination country and sales channel.
- Expected order quantity and repeat-order forecast.
- Required gas family, pressure, injector and burner outputs.
- Ignition, inlet and safety-component requirements.
- Logo, colors, control graphics and rating-label content.
- Manual languages, warnings, packaging and barcode plan.
- Required testing, documentation and inspection standard.
Related Product Descriptions Used by Buyers
Depending on region and channel, purchasers may also describe this configuration as a
3 burner gas stove for sale or
cooking gas stove 3 burner. These terms refer to the same visible burner-count and format category; the final specification must still define the exact gas system, dimensions, cover, stand, accessories, and approved operating conditions.
Buyer FAQ
How many burners does 6023J have?
It has 3 visible cooking positions and 3 front controls in the supplied product image. Final burner ratings and control correspondence should be confirmed in the technical specification.
What installation format is shown?
The supplied image shows a
freestanding open rack format with a full ribbed cover. Installation conditions and operating clearances must follow the approved manual.
How is the product packed?
The catalog lists 1 piece(s) per carton and reference loading of 629 / 1,536 pcs. The calculated nominal packed volume is
0.0415 m³ per cooker based on the supplied packing dimensions and 1 piece(s) per carton. This is a model-comparison figure only. Production carton tolerances, inserts, accessory bundles, pallet use, and the loading method can change actual utilization.
Are gas type, pressure and ignition confirmed by the screenshot?
No. Those details are not shown in the supplied catalog panel and must be agreed for the destination market before production or publication of technical claims.
Can ECOBRIDGE support private-label orders?
The project can be evaluated for OEM or ODM requirements such as logo, graphics, labels, instructions, packaging, and market-specific configuration. Final options depend on the confirmed specification, order quantity, and manufacturing feasibility.
Request the Correct 6023J Production Version
Use
kitchen gas stove 3 burner Model 6023J as a specific sourcing platform with documented dimensions, packing, and product structure. Send ECOBRIDGE the market, quantity, gas requirements, branding plan, and compliance needs to receive a configuration-based quotation rather than a generic burner-count offer.
