Direct answer: Freestanding 4 Burner Hybrid Stove 6024D1J is a freestanding mixed-zone cooker for importers, distributors, wholesalers and private-label buyers comparing four-position cookers. It uses 3 gas burners + 1 electric hot plate and measures 490 × 545 × 825 mm according to the supplied catalog. Final gas, electrical, compliance and market-use details remain subject to order-specific confirmation. Model 6024D1J turns a three-gas-burner and one-hotplate layout into a freestanding cooking system. The supplied image shows a full hinged cover, an open frame, and two lower shelf levels beneath the cooker body.

Freestanding 4 burner hybrid stove: Product Definition

6024D1J is a freestanding mixed-zone cooker identified by four independently presented cooking positions and the visible structure shown in the supplied product image. The cooking body and open rack form one saleable configuration, so stand hardware and assembly information are procurement-critical parts of the model. Its four-position count combines gas and electric cooking: 3 gas burners + 1 electric hot plate. This is not an all-gas cooker, and the electrical specification must be approved together with the gas specification.

Who Should Evaluate 6024D1J?

6024D1J is most relevant to importers and distributors assessing a complete cooker-and-stand package. It may also fit private-label programs where the assembled format, shelf arrangement and carton split are part of the range decision.

• Regional appliance distribution programs that can support both gas and electrical compliance requirements.
• Private-label assortments that need the exact gas-to-hotplate balance shown for this model.
• Wholesale projects where carton data, labels and manuals will be approved before production.

Suitability is conditional on the final gas, electrical, installation and compliance configuration for the destination market.

Features That Matter in Procurement

3 gas burners + 1 electric hot plate layout

Buyer benefit: Four cooking positions give buyers a clear capacity point while preserving the exact energy mix of this model. Procurement value: Document both electrical and gas ratings on the specification, rating label and manual; approving only the visible burner count is not sufficient.

Full hinged cover

Buyer benefit: The cover creates a different closed-product presentation from short-guard versions. Procurement value: Check hinge movement, alignment and protection in the production carton; do not assume it is interchangeable with other 6024 covers.

Open rack with two shelf levels

Buyer benefit: The frame creates a freestanding format and adds accessible lower storage surfaces. Procurement value: Treat legs, shelves, feet, fasteners and cooker attachment points as controlled components during sampling and packing approval.

Product Range and Buyer Search Context

Procurement teams may compare it with a gas stove with solid hotplate, a open-rack combination cooker, or another three gas burner floor stove. The stand, shelves and rear structure must remain part of the comparison because they affect assembly, packaging and retail presentation. 6024D1J should be presented as a four-burner product because it provides four cooking positions. However, its listing must also state 3 gas burners + 1 electric hot plate so buyers can distinguish an all-gas cooker from a gas-electric combination stove before requesting a quotation.

How This Model Compares Within the 6024 Series

D1J is the covered stand version of the three-gas, one-hotplate concept. Buyers wanting a perforated rear panel should compare GD1JM; buyers wanting the taller short-guard stand should compare HD1J. The better choice depends on the approved energy configuration, required format, destination rules and packing method—not on burner count alone.

Confirmed Product Information for 6024D1J

6024D1J is identified as a freestanding mixed-zone cooker with 3 gas burners + 1 electric hot plate. The supplied image shows a open floor rack with two lower shelves and a full solid hinged cover, while the catalog lists the product size as 490 × 545 × 825 mm. The catalog lists a net/gross weight basis of 9.84 kg / 10.54 kg. The color box is listed as 500 × 210 × 565 mm. The packing statement is Support bracket: 660 × 300 × 130 mm, 10 sets (catalog note), with 1 unit per carton and a reference loading quantity of 960 pcs (40HQ reference). These figures help buyers conduct an initial model and logistics review; the concise specification table remains in the product summary above.

What Buyers Should Confirm Before Ordering

1. Request a complete frame-parts list, fastener count and assembly drawing.
2. Confirm how one cooker carton is reconciled with the ten-set support-bracket pack.
3. Approve the full hinged cover together with the assembled rack height and stability.
4. Confirm voltage, frequency, plug or cord format and the rated input of each electric hot plate.
5. State the destination market and identify the required product, label, manual and packaging compliance documents.
6. Approve a production-representative sample before final artwork and mass production.

Sample Approval Checklist

Before mass production, the buyer should review a sample built to the proposed order specification. The review should record measurable acceptance points rather than rely only on appearance.

• Assembled height, level and stability on a flat surface
• Frame alignment, shelf fit, feet and fastener count
• Attachment between the cooker body and stand
• Rear guard, cover or panel fit and finish
• Control movement and correspondence with each cooking position
• Rating-label data and warning placement
• Production-style carton contents and assembly manual

How Should Buyers Read the Packing Data?

The catalog lists a color-box size for the cooker and a separate support-bracket pack described as ten sets. Because those two packing lines do not establish one combined carton volume per finished unit, the XML does not calculate CBM. Request a packing diagram and a cooker-to-stand quantity reconciliation before freight costing. Reference loading quantities are catalog planning figures, not a freight guarantee. Final booking should use the approved production pack-out, shipment ratio and logistics provider calculation.

OEM and Private-Label Project Scope

For an OEM or ODM enquiry, buyers can ask ECOBRIDGE to evaluate logo placement, control-panel graphics, rating labels, instructions, carton printing, frame finish, hardware presentation and assembly documentation. Availability depends on the selected production configuration, order requirements, technical review and project feasibility. Private-label approval should link one model code to one controlled specification. Product photos, the sample, bill of materials, rating label, manual and carton should all describe the same 3 gas burners + 1 electric hot plate version.

Quality-Control Considerations

Typical inspection points for this configuration may include gas leakage, burner fitting, flame stability under the specified gas conditions, electric hotplate operation at the approved electrical rating, control correspondence, surface inspection and protective packing. The actual inspection plan, sampling level and acceptance criteria should be agreed for the order rather than inferred from this product page. For stand models, the buyer should also define assembly and stability checks. For every version, test conditions must match the approved gas and electrical specification.

RFQ Checklist for 6024D1J

A useful quotation request should define the product revision as well as the quantity. Send the following details so ECOBRIDGE can review technical and commercial feasibility.

• Model and configuration: 6024D1J, 3 gas burners + 1 electric hot plate.
• Target market: country, sales region and intended distribution channel.
• Required quantity: trial order quantity and expected repeat-order volume.
• Gas requirement: gas family, nominal pressure, connection and requested burner ratings.
• Electrical requirement: voltage, frequency, plug or cord format and hotplate input.
• Compliance brief: applicable destination documents, testing or labeling requirements.
• Branding scope: logo, rating label, control graphics, language and manual requirements.
• Packaging brief: carton artwork, protection method, shipping marks and pack-out approval.
• Trade information: delivery port, requested commercial terms and target schedule.

To Be Confirmed During RFQ

Confirm the complete packing bill, assembly instructions, electrical rating for the solid plate, gas family, pressure, burner outputs, ignition, inlet location, and safety requirements. The visible configuration supports product identification, but it does not establish market approval. No certification, market approval, performance value or unrestricted operating environment is claimed until supporting documents for the ordered configuration have been reviewed.

Related Sourcing Resources

• four burner gas stove range
• OEM gas stove manufacturing process
• gas stove quality-control guide

For an EU destination, buyers can consult Regulation (EU) 2016/426 on appliances burning gaseous fuels as an authority source. This reference does not state that 6024D1J is certified or approved for the EU; applicable requirements and evidence remain to be confirmed for the ordered version.

6024D1J Buyer FAQ

What is included in the visible cooking layout?

The image shows three gas burners, one electric hot plate and four front controls on a freestanding open rack.

Why is the packing basis important for this model?

The cooker color box and support bracket use separate packing descriptions, so one combined per-unit cube cannot be derived from the available table.

What should be checked during sample approval?

Assemble the cooker, shelves, legs, feet and hardware from production-style cartons, then verify alignment, stability and the final instructions.

What defines the freestanding 4 burner hybrid stove?

6024D1J is defined by four visible cooking positions arranged as 3 gas burners + 1 electric hot plate, together with its open floor rack with two lower shelves and a full solid hinged cover. This phrase identifies the product format and visible energy layout; it does not establish unconfirmed burner output, gas compatibility, electrical rating, certification or installation approval. Those details must be specified and verified for the order.

Can the electrical and gas configuration be selected for a destination market?

The required voltage, frequency, plug or cord, hotplate input, gas family, pressure and connection should be stated in the RFQ. ECOBRIDGE must review feasibility and confirm the exact production specification. The visible four-position arrangement does not prove that every electrical or gas option is available.

Is OEM or private-label supply automatically included?

No. Buyers may submit logo, label, manual, control-panel and carton requirements for project evaluation. Approval depends on the selected configuration, technical feasibility, commercial terms and sample confirmation. Do not release retail artwork until one controlled model specification has been agreed.

Request a Configuration-Based Quote for 6024D1J

Request pricing for 6024D1J with the required energy configuration, complete stand specification, target quantity and destination market. Request a quote from ECOBRIDGE and reference model 6024D1J.