Direct answer: Compact 4 Burner Hybrid Stove 6024HD1 is a tabletop mixed-zone cooker for importers, distributors, wholesalers and private-label buyers comparing four-position cookers. It uses 3 gas burners + 1 electric hot plate and measures 490 × 544 × 263 mm according to the supplied catalog. Final gas, electrical, compliance and market-use details remain subject to order-specific confirmation. The 6024HD1 is a compact three burner gas electric stove format with three visible gas burners and one solid hotplate-style cooking position. Its short rear guard leaves the cooking surface open and differentiates it from full-cover versions.

Compact 4 burner hybrid stove: Product Definition

6024HD1 is a tabletop mixed-zone cooker identified by four independently presented cooking positions and the visible structure shown in the supplied product image. It is supplied as a tabletop-format appliance, so buyers should compare the body footprint, rear protection and required installation surface with their channel needs. Its four-position count combines gas and electric cooking: 3 gas burners + 1 electric hot plate. This is not an all-gas cooker, and the electrical specification must be approved together with the gas specification.

Confirmed Product Information for 6024HD1

6024HD1 is identified as a tabletop mixed-zone cooker with 3 gas burners + 1 electric hot plate. The supplied image shows a tabletop body with a short rear guard, while the catalog lists the product size as 490 × 544 × 263 mm. The catalog lists a net/gross weight basis of 5.04 kg / 5.55 kg. The color box is listed as 500 × 155 × 560 mm. The packing statement is 515 × 485 × 575 mm, with 1 unit per carton and a reference loading quantity of 1,404 pcs (40HQ reference). These figures help buyers conduct an initial model and logistics review; the concise specification table remains in the product summary above.

Features That Matter in Procurement

3 gas burners + 1 electric hot plate layout

Buyer benefit: Four cooking positions give buyers a clear capacity point while preserving the exact energy mix of this model. Procurement value: Document both electrical and gas ratings on the specification, rating label and manual; approving only the visible burner count is not sufficient.

Short rear guard

Buyer benefit: The low guard preserves an open tabletop profile while distinguishing this body from full-cover models. Procurement value: Confirm its height, finish and attachment on the approved sample so listing images and cartons match the production revision.

Tabletop body

Buyer benefit: The cooker can be evaluated for channels that sell countertop-format appliances rather than integrated floor stands. Procurement value: Confirm the intended supporting surface, clearances and installation instructions for the destination market before launch.

Product Range and Buyer Search Context

Range planners may compare it with a three gas one hotplate cooker, a compact tabletop combination stove, or another short-guard mixed cooker. The comparison should preserve the exact cooking-zone mix and rear structure instead of grouping every four-position tabletop cooker as the same item. 6024HD1 should be presented as a four-burner product because it provides four cooking positions. However, its listing must also state 3 gas burners + 1 electric hot plate so buyers can distinguish an all-gas cooker from a gas-electric combination stove before requesting a quotation.

Who Should Evaluate 6024HD1?

6024HD1 is intended for importers, wholesalers, retail chains and appliance brands comparing compact four-position tabletop formats. The model can be assessed as part of a range that needs a clearly differentiated gas and electric cooking mix.

• Regional appliance distribution programs that can support both gas and electrical compliance requirements.
• Private-label assortments that need the exact gas-to-hotplate balance shown for this model.
• Wholesale projects where carton data, labels and manuals will be approved before production.

Suitability is conditional on the final gas, electrical, installation and compliance configuration for the destination market.

How This Model Compares Within the 6024 Series

6024HD1 and 6024HD2 share the compact short-guard format. HD1 uses a three-gas, one-hotplate split, whereas HD2 uses two gas burners and two hot plates. The better choice depends on the approved energy configuration, required format, destination rules and packing method—not on burner count alone.

What Buyers Should Confirm Before Ordering

1. Confirm the single hotplate rating, plug and cord configuration.
2. Approve the short guard, three gas burners and control-panel artwork as one model revision.
3. Use the final 515 × 485 × 575 mm production carton for loading verification.
4. Confirm voltage, frequency, plug or cord format and the rated input of each electric hot plate.
5. State the destination market and identify the required product, label, manual and packaging compliance documents.
6. Approve a production-representative sample before final artwork and mass production.

How Should Buyers Read the Packing Data?

The catalog provides product, color-box, and packing dimensions, together with one unit per carton, net and gross weights, and a 40HQ reference quantity. These figures can support a preliminary comparison, subject to the final production pack and shipping plan. Reference loading quantities are catalog planning figures, not a freight guarantee. Final booking should use the approved production pack-out, shipment ratio and logistics provider calculation.

RFQ Checklist for 6024HD1

A useful quotation request should define the product revision as well as the quantity. Send the following details so ECOBRIDGE can review technical and commercial feasibility.

• Model and configuration: 6024HD1, 3 gas burners + 1 electric hot plate.
• Target market: country, sales region and intended distribution channel.
• Required quantity: trial order quantity and expected repeat-order volume.
• Gas requirement: gas family, nominal pressure, connection and requested burner ratings.
• Electrical requirement: voltage, frequency, plug or cord format and hotplate input.
• Compliance brief: applicable destination documents, testing or labeling requirements.
• Branding scope: logo, rating label, control graphics, language and manual requirements.
• Packaging brief: carton artwork, protection method, shipping marks and pack-out approval.
• Trade information: delivery port, requested commercial terms and target schedule.

Sample Approval Checklist

Before mass production, the buyer should review a sample built to the proposed order specification. The review should record measurable acceptance points rather than rely only on appearance.

• Cooking-position layout and control correspondence
• Cover or rear-guard alignment and finish
• Pan-support seating and burner-part fit
• Electric hotplate surface and control marking
• Product dimensions and carton contents
• Rating-label data, instructions and packaging artwork

OEM and Private-Label Project Scope

For an OEM or ODM enquiry, buyers can ask ECOBRIDGE to evaluate logo placement, control-panel graphics, rating labels, instructions, carton printing, visible finish and market-specific electrical or gas configuration. Availability depends on the selected production configuration, order requirements, technical review and project feasibility. Private-label approval should link one model code to one controlled specification. Product photos, the sample, bill of materials, rating label, manual and carton should all describe the same 3 gas burners + 1 electric hot plate version.

Quality-Control Considerations

Typical inspection points for this configuration may include gas leakage, burner fitting, flame stability under the specified gas conditions, electric hotplate operation at the approved electrical rating, control correspondence, surface inspection and protective packing. The actual inspection plan, sampling level and acceptance criteria should be agreed for the order rather than inferred from this product page. For stand models, the buyer should also define assembly and stability checks. For every version, test conditions must match the approved gas and electrical specification.

To Be Confirmed During RFQ

Confirm voltage, frequency, plug, solid-plate wattage, gas family, supply pressure, burner inputs, ignition, inlet location, and safety devices. The product photo identifies the visible layout but does not verify electrical or gas performance. No certification, market approval, performance value or unrestricted operating environment is claimed until supporting documents for the ordered configuration have been reviewed.

Related Sourcing Resources

• four burner gas stove range
• tabletop stove and cooktop buyer guide
• LPG and natural gas sourcing guide

For an EU destination, buyers can consult Regulation (EU) 2016/426 on appliances burning gaseous fuels as an authority source. This reference does not state that 6024HD1 is certified or approved for the EU; applicable requirements and evidence remain to be confirmed for the ordered version.

6024HD1 Buyer FAQ

What is the 6024HD1 energy layout?

It combines three gas burners with one electric hot plate across four cooking positions.

How does HD1 differ from HD2?

HD1 has a three-gas, one-hotplate split; HD2 has two gas burners and two electric hot plates.

Which format is shown?

The supplied image shows a tabletop cooker with a short rear guard rather than a floor stand or full hinged cover.

What defines the compact 4 burner hybrid stove?

6024HD1 is defined by four visible cooking positions arranged as 3 gas burners + 1 electric hot plate, together with its tabletop body with a short rear guard. This phrase identifies the product format and visible energy layout; it does not establish unconfirmed burner output, gas compatibility, electrical rating, certification or installation approval. Those details must be specified and verified for the order.

Can the electrical and gas configuration be selected for a destination market?

The required voltage, frequency, plug or cord, hotplate input, gas family, pressure and connection should be stated in the RFQ. ECOBRIDGE must review feasibility and confirm the exact production specification. The visible four-position arrangement does not prove that every electrical or gas option is available.

Is OEM or private-label supply automatically included?

No. Buyers may submit logo, label, manual, control-panel and carton requirements for project evaluation. Approval depends on the selected configuration, technical feasibility, commercial terms and sample confirmation. Do not release retail artwork until one controlled model specification has been agreed.

Request a Configuration-Based Quote for 6024HD1

For 6024HD1 pricing, send the required gas and electrical standards, quantity, destination and any product-graphics or packaging requirements. Request a quote from ECOBRIDGE and reference model 6024HD1.