Direct antwoord: Freestanding 4 Burner Gas Electric Cooker 6024D2J is a freestanding mixed-zone cooker for importers, distributors, wholesalers and private-label buyers comparing four-position cookers. It uses 2 gas burners + 2 electric hot plates and measures 490 × 545 × 825 mm according to the supplied catalog. Final gas, electrical, compliance and market-use details remain subject to order-specific confirmation. Model 6024D2J combines two visible gas burners and two solid hotplate-style positions with a freestanding open rack. The full hinged cover and two lower shelf levels distinguish it from the tabletop 6024D2-2 configuration.

Freestanding 4 burner gas electric cooker: Product Definition

6024D2J is a freestanding mixed-zone cooker identified by four independently presented cooking positions and the visible structure shown in the supplied product image. The cooking body and open rack form one saleable configuration, so stand hardware and assembly information are procurement-critical parts of the model. Its four-position count combines gas and electric cooking: 2 gas burners + 2 electric hot plates. This is not an all-gas cooker, and the electrical specification must be approved together with the gas specification.

Confirmed Product Information for 6024D2J

6024D2J is identified as a freestanding mixed-zone cooker with 2 gas burners + 2 electric hot plates. The supplied image shows a open floor rack with two lower shelves and a full solid hinged cover, while the catalog lists the product size as 490 × 545 × 825 mm. The catalog lists a net/gross weight basis of 10.54 kg / 11.24 kg. The color box is listed as 500 × 210 × 565 mm. The packing statement is Support bracket: 660 × 300 × 130 mm, 10 sets (catalog note), with 1 unit per carton and a reference loading quantity of 960 pcs (40HQ reference). These figures help buyers conduct an initial model and logistics review; the concise specification table remains in the product summary above.

Features That Matter in Procurement

2 gas burners + 2 electric hot plates layout

Voordeel voor de koper: Four cooking positions give buyers a clear capacity point while preserving the exact energy mix of this model. Aankoopwaarde: Document both electrical and gas ratings on the specification, rating label and manual; approving only the visible burner count is not sufficient.

Volledig scharnierend deksel

Voordeel voor de koper: The cover creates a different closed-product presentation from short-guard versions. Aankoopwaarde: Check hinge movement, alignment and protection in the production carton; do not assume it is interchangeable with other 6024 covers.

Open rack with two shelf levels

Voordeel voor de koper: The frame creates a freestanding format and adds accessible lower storage surfaces. Aankoopwaarde: Treat legs, shelves, feet, fasteners and cooker attachment points as controlled components during sampling and packing approval.

Product Range and Buyer Search Context

Procurement teams may compare it with a two gas two hotplate floor cooker, a covered stove with open rack, or another four-zone combination appliance. The stand, shelves and rear structure must remain part of the comparison because they affect assembly, packaging and retail presentation. 6024D2J should be presented as a four-burner product because it provides four cooking positions. However, its listing must also state 2 gas burners + 2 electric hot plates so buyers can distinguish an all-gas cooker from a gas-electric combination stove before requesting a quotation.

Who Should Evaluate 6024D2J?

6024D2J is most relevant to importers and distributors assessing a complete cooker-and-stand package. It may also fit private-label programs where the assembled format, shelf arrangement and carton split are part of the range decision.

• Regional appliance distribution programs that can support both gas and electrical compliance requirements.
• Private-label assortments that need the exact gas-to-hotplate balance shown for this model.
• Wholesale projects where carton data, labels and manuals will be approved before production.

Suitability is conditional on the final gas, electrical, installation and compliance configuration for the destination market.

How This Model Compares Within the 6024 Series

D2J carries the covered two-gas, two-hotplate format on a stand. GD2J uses the same visible energy split with a perforated rear panel instead. The better choice depends on the approved energy configuration, required format, destination rules and packing method—not on burner count alone.

Wat kopers moeten controleren voordat ze een bestelling plaatsen

1. Confirm the assembled height and the way the cooker body is secured to the rack.
2. Reconcile every stove with the correct shelves, legs, feet and fastener package.
3. Specify both the electrical connection and the destination gas conditions.
4. Confirm voltage, frequency, plug or cord format and the rated input of each electric hot plate.
5. State the destination market and identify the required product, label, manual and packaging compliance documents.
6. Approve a production-representative sample before final artwork and mass production.

How Should Buyers Read the Packing Data?

The catalog separates the cooker color box from a ten-set support-bracket package. It lists one piece per carton and a 40HQ reference quantity, but it does not give a single combined shipping cube for one complete cooker-and-stand set. Obtain a packing drawing before calculating landed cost. Reference loading quantities are catalog planning figures, not a freight guarantee. Final booking should use the approved production pack-out, shipment ratio and logistics provider calculation.

RFQ Checklist for 6024D2J

A useful quotation request should define the product revision as well as the quantity. Send the following details so ECOBRIDGE can review technical and commercial feasibility.

• Model and configuration: 6024D2J, 2 gas burners + 2 electric hot plates.
• Doelgroep: country, sales region and intended distribution channel.
• Required quantity: trial order quantity and expected repeat-order volume.
• Gas requirement: gas family, nominal pressure, connection and requested burner ratings.
• Electrical requirement: voltage, frequency, plug or cord format and hotplate input.
• Overzicht van de nalevingsvereisten: applicable destination documents, testing or labeling requirements.
• Branding scope: logo, rating label, control graphics, language and manual requirements.
• Packaging brief: carton artwork, protection method, shipping marks and pack-out approval.
• Trade information: delivery port, requested commercial terms and target schedule.

Voorbeeld van een checklist voor goedkeuring

Before mass production, the buyer should review a sample built to the proposed order specification. The review should record measurable acceptance points rather than rely only on appearance.

• Assembled height, level and stability on a flat surface
• Frame alignment, shelf fit, feet and fastener count
• Attachment between the cooker body and stand
• Rear guard, cover or panel fit and finish
• Control movement and correspondence with each cooking position
• Gegevens op het etiket en plaatsing van waarschuwingen
• Production-style carton contents and assembly manual

OEM and Private-Label Project Scope

For an OEM or ODM enquiry, buyers can ask ECOBRIDGE to evaluate logo placement, control-panel graphics, rating labels, instructions, carton printing, frame finish, hardware presentation and assembly documentation. Availability depends on the selected production configuration, order requirements, technical review and project feasibility. Private-label approval should link one model code to one controlled specification. Product photos, the sample, bill of materials, rating label, manual and carton should all describe the same 2 gas burners + 2 electric hot plates version.

Overwegingen met betrekking tot kwaliteitscontrole

Typical inspection points for this configuration may include gas leakage, burner fitting, flame stability under the specified gas conditions, electric hotplate operation at the approved electrical rating, control correspondence, surface inspection and protective packing. The actual inspection plan, sampling level and acceptance criteria should be agreed for the order rather than inferred from this product page. For stand models, the buyer should also define assembly and stability checks. For every version, test conditions must match the approved gas and electrical specification.

Wordt bevestigd tijdens de offerteaanvraag

Ask for the final bill of materials, stand hardware count, assembly manual, voltage, frequency, plug, hotplate wattage, gas family, pressure, burner heat inputs, ignition method, and safety configuration. These items should match labels and packaging before production approval. No certification, market approval, performance value or unrestricted operating environment is claimed until supporting documents for the ordered configuration have been reviewed.

Related Sourcing Resources

• gasfornuis met vier branders
• OEM gas stove manufacturing process
• Handleiding voor kwaliteitscontrole van gasfornuizen

For an EU destination, buyers can consult Verordening (EU) 2016/426 betreffende toestellen die gasvormige brandstoffen verbranden as an authority source. This reference does not state that 6024D2J is certified or approved for the EU; applicable requirements and evidence remain to be confirmed for the ordered version.

6024D2J Buyer FAQ

How does 6024D2J differ from the tabletop D2-2?

6024D2J adds a freestanding open rack and is listed at 825 mm high, while D2-2 is a tabletop covered cooker.

Is a single shipping-carton volume available?

No. The catalog separates the cooker box from a support-bracket pack containing ten sets, so the complete shipping basis needs confirmation.

What should the assembly manual show?

It should identify each frame component, shelf direction, fastening point and the method used to secure the cooking body.

What defines the freestanding 4 burner gas electric cooker?

6024D2J is defined by four visible cooking positions arranged as 2 gas burners + 2 electric hot plates, together with its open floor rack with two lower shelves and a full solid hinged cover. This phrase identifies the product format and visible energy layout; it does not establish unconfirmed burner output, gas compatibility, electrical rating, certification or installation approval. Those details must be specified and verified for the order.

Can the electrical and gas configuration be selected for a destination market?

The required voltage, frequency, plug or cord, hotplate input, gas family, pressure and connection should be stated in the RFQ. ECOBRIDGE must review feasibility and confirm the exact production specification. The visible four-position arrangement does not prove that every electrical or gas option is available.

Is OEM or private-label supply automatically included?

No. Buyers may submit logo, label, manual, control-panel and carton requirements for project evaluation. Approval depends on the selected configuration, technical feasibility, commercial terms and sample confirmation. Do not release retail artwork until one controlled model specification has been agreed.

Request a Configuration-Based Quote for 6024D2J

Send ECOBRIDGE the 6024D2J configuration, destination, expected volume and stand-packing requirements for quotation review. Request a quote from ECOBRIDGE and reference model 6024D2J.