Direct antwoord: Covered 4 Burner Combination Cooker 6024D1-2 is a tabletop combination cooker for importers, distributors, wholesalers and private-label buyers comparing four-position cookers. It uses 3 gas burners + 1 electric hot plate and measures 490 × 545 × 173 mm according to the supplied catalog. Final gas, electrical, compliance and market-use details remain subject to order-specific confirmation. The 6024D1-2 is a four-position tabletop cooker built around three visible gas burners and one solid hotplate-style zone. A full hinged metal cover and four front controls define this version for buyers comparing mixed-zone cooker assortments.

Covered 4 burner combination cooker: Product Definition

6024D1-2 is a tabletop combination cooker identified by four independently presented cooking positions and the visible structure shown in the supplied product image. It is supplied as a tabletop-format appliance, so buyers should compare the body footprint, rear protection and required installation surface with their channel needs. Its four-position count combines gas and electric cooking: 3 gas burners + 1 electric hot plate. This is not an all-gas cooker, and the electrical specification must be approved together with the gas specification.

Features That Matter in Procurement

3 gas burners + 1 electric hot plate layout

Voordeel voor de koper: Four cooking positions give buyers a clear capacity point while preserving the exact energy mix of this model. Aankoopwaarde: Document both electrical and gas ratings on the specification, rating label and manual; approving only the visible burner count is not sufficient.

Volledig scharnierend deksel

Voordeel voor de koper: The cover creates a different closed-product presentation from short-guard versions. Aankoopwaarde: Check hinge movement, alignment and protection in the production carton; do not assume it is interchangeable with other 6024 covers.

Tafelblad

Voordeel voor de koper: The cooker can be evaluated for channels that sell countertop-format appliances rather than integrated floor stands. Aankoopwaarde: Confirm the intended supporting surface, clearances and installation instructions for the destination market before launch.

Confirmed Product Information for 6024D1-2

6024D1-2 is identified as a tabletop combination cooker with 3 gas burners + 1 electric hot plate. The supplied image shows a tabletop body with a full solid hinged cover, while the catalog lists the product size as 490 × 545 × 173 mm. The catalog lists a net/gross weight basis of 5.72 kg / 6.23 kg. The color box is listed as 500 × 185 × 565 mm. The packing statement is 500 × 185 × 565 mm, with 1 unit per carton and a reference loading quantity of 530 / 1,296 pcs (20GP / 40HQ reference). These figures help buyers conduct an initial model and logistics review; the concise specification table remains in the product summary above.

How This Model Compares Within the 6024 Series

Compared with 6024D2-2, this model keeps three gas burners and uses only one electric hot plate. The two models share a covered tabletop concept but should not share unverified electrical artwork or configuration data. The better choice depends on the approved energy configuration, required format, destination rules and packing method—not on burner count alone.

Product Range and Buyer Search Context

Range planners may compare it with a four-zone combination cooker, a tabletop gas and hotplate stove, or another solid-lid cooker. The comparison should preserve the exact cooking-zone mix and rear structure instead of grouping every four-position tabletop cooker as the same item. 6024D1-2 should be presented as a four-burner product because it provides four cooking positions. However, its listing must also state 3 gas burners + 1 electric hot plate so buyers can distinguish an all-gas cooker from a gas-electric combination stove before requesting a quotation.

Who Should Evaluate 6024D1-2?

6024D1-2 is intended for importers, wholesalers, retail chains and appliance brands comparing compact four-position tabletop formats. The model can be assessed as part of a range that needs a clearly differentiated gas and electric cooking mix.

• Regional appliance distribution programs that can support both gas and electrical compliance requirements.
• Private-label assortments that need the exact gas-to-hotplate balance shown for this model.
• Wholesale projects where carton data, labels and manuals will be approved before production.

Suitability is conditional on the final gas, electrical, installation and compliance configuration for the destination market.

How Should Buyers Read the Packing Data?

For this model, the catalog lists the same dimensions for the color box and packing size, with one unit per carton. Net and gross weights and both 20GP and 40HQ reference quantities are also provided, giving procurement teams a useful starting point for carton and loading checks. Reference loading quantities are catalog planning figures, not a freight guarantee. Final booking should use the approved production pack-out, shipment ratio and logistics provider calculation.

Wat kopers moeten controleren voordat ze een bestelling plaatsen

1. Verify which front control operates the electric hot plate and document the approved panel graphics.
2. Match the full cover, burner layout and model number across samples, manuals and cartons.
3. Confirm the electrical rating and the gas specification before artwork approval.
4. Confirm voltage, frequency, plug or cord format and the rated input of each electric hot plate.
5. State the destination market and identify the required product, label, manual and packaging compliance documents.
6. Approve a production-representative sample before final artwork and mass production.

Voorbeeld van een checklist voor goedkeuring

Before mass production, the buyer should review a sample built to the proposed order specification. The review should record measurable acceptance points rather than rely only on appearance.

• Cooking-position layout and control correspondence
• Cover or rear-guard alignment and finish
• Pasvorm van de panhouder en het branderonderdeel
• Electric hotplate surface and control marking
• Product dimensions and carton contents
• Rating-label data, instructions and packaging artwork

RFQ Checklist for 6024D1-2

A useful quotation request should define the product revision as well as the quantity. Send the following details so ECOBRIDGE can review technical and commercial feasibility.

• Model and configuration: 6024D1-2, 3 gas burners + 1 electric hot plate.
• Doelgroep: country, sales region and intended distribution channel.
• Required quantity: trial order quantity and expected repeat-order volume.
• Gas requirement: gas family, nominal pressure, connection and requested burner ratings.
• Electrical requirement: voltage, frequency, plug or cord format and hotplate input.
• Overzicht van de nalevingsvereisten: applicable destination documents, testing or labeling requirements.
• Branding scope: logo, rating label, control graphics, language and manual requirements.
• Packaging brief: carton artwork, protection method, shipping marks and pack-out approval.
• Trade information: delivery port, requested commercial terms and target schedule.

Overwegingen met betrekking tot kwaliteitscontrole

Typical inspection points for this configuration may include gas leakage, burner fitting, flame stability under the specified gas conditions, electric hotplate operation at the approved electrical rating, control correspondence, surface inspection and protective packing. The actual inspection plan, sampling level and acceptance criteria should be agreed for the order rather than inferred from this product page. For stand models, the buyer should also define assembly and stability checks. For every version, test conditions must match the approved gas and electrical specification.

OEM and Private-Label Project Scope

For an OEM or ODM enquiry, buyers can ask ECOBRIDGE to evaluate logo placement, control-panel graphics, rating labels, instructions, carton printing, visible finish and market-specific electrical or gas configuration. Availability depends on the selected production configuration, order requirements, technical review and project feasibility. Private-label approval should link one model code to one controlled specification. Product photos, the sample, bill of materials, rating label, manual and carton should all describe the same 3 gas burners + 1 electric hot plate version.

Wordt bevestigd tijdens de offerteaanvraag

Electrical ratings and gas-system details are not included in the supplied product panel. Before launch, confirm voltage, frequency, hotplate input, gas family, supply pressure, burner ratings, ignition, inlet, safety components, plug, cord, and destination-market documentation. No certification, market approval, performance value or unrestricted operating environment is claimed until supporting documents for the ordered configuration have been reviewed.

Related Sourcing Resources

• gasfornuis met vier branders
• tabletop stove and cooktop buyer guide
• Gids voor de inkoop van LPG en aardgas

For an EU destination, buyers can consult Verordening (EU) 2016/426 betreffende toestellen die gasvormige brandstoffen verbranden as an authority source. This reference does not state that 6024D1-2 is certified or approved for the EU; applicable requirements and evidence remain to be confirmed for the ordered version.

6024D1-2 Buyer FAQ

Does 6024D1-2 count as a four-burner stove?

Yes. It provides four cooking positions: three gas burners and one electric hot plate.

What distinguishes this model from 6024D2-2?

6024D1-2 uses a three-gas, one-hotplate layout; 6024D2-2 changes the mix to two gas burners and two electric hot plates.

Is the outer carton information complete?

The catalog gives matching color-box and packing dimensions of 500 × 185 × 565 mm, one unit per carton, and reference loading data. Production packing still requires final approval.

What defines the covered 4 burner combination cooker?

6024D1-2 is defined by four visible cooking positions arranged as 3 gas burners + 1 electric hot plate, together with its tabletop body with a full solid hinged cover. This phrase identifies the product format and visible energy layout; it does not establish unconfirmed burner output, gas compatibility, electrical rating, certification or installation approval. Those details must be specified and verified for the order.

Can the electrical and gas configuration be selected for a destination market?

The required voltage, frequency, plug or cord, hotplate input, gas family, pressure and connection should be stated in the RFQ. ECOBRIDGE must review feasibility and confirm the exact production specification. The visible four-position arrangement does not prove that every electrical or gas option is available.

Is OEM or private-label supply automatically included?

No. Buyers may submit logo, label, manual, control-panel and carton requirements for project evaluation. Approval depends on the selected configuration, technical feasibility, commercial terms and sample confirmation. Do not release retail artwork until one controlled model specification has been agreed.

Request a Configuration-Based Quote for 6024D1-2

For an RFQ, identify model 6024D1-2 and provide the market, quantity, gas conditions, electrical standard and packaging brief. Request a quote from ECOBRIDGE and reference model 6024D1-2.