সরাসরি উত্তর: 4 Burner Cooker with Stand and Hot Plate 6024GD1JM is a freestanding mixed-zone cooker for importers, distributors, wholesalers and private-label buyers comparing four-position cookers. It uses 3 gas burners + 1 electric hot plate and measures 490 × 545 × 825 mm according to the supplied catalog. Final gas, electrical, compliance and market-use details remain subject to order-specific confirmation. The 6024GD1JM is a freestanding combination cooker with three visible gas burners, one solid hotplate-style position, an open storage rack, and a tall perforated rear panel. This structure gives the model a distinct presentation within the 6024D family.

4 burner cooker with stand and hot plate: Product Definition

6024GD1JM is a freestanding mixed-zone cooker identified by four independently presented cooking positions and the visible structure shown in the supplied product image. The cooking body and open rack form one saleable configuration, so stand hardware and assembly information are procurement-critical parts of the model. Its four-position count combines gas and electric cooking: 3 gas burners + 1 electric hot plate. This is not an all-gas cooker, and the electrical specification must be approved together with the gas specification.

Features That Matter in Procurement

3 gas burners + 1 electric hot plate layout

ক্রেতার সুবিধা: Four cooking positions give buyers a clear capacity point while preserving the exact energy mix of this model. ক্রয় মূল্য: Document both electrical and gas ratings on the specification, rating label and manual; approving only the visible burner count is not sufficient.

Tall perforated rear panel

ক্রেতার সুবিধা: The panel creates a distinct assembled profile and provides a physical rear boundary behind the cooking deck. ক্রয় মূল্য: Approve the panel finish, mounting points and transit protection because it is part of the delivered product presentation.

Open rack with two shelf levels

ক্রেতার সুবিধা: The frame creates a freestanding format and adds accessible lower storage surfaces. ক্রয় মূল্য: Treat legs, shelves, feet, fasteners and cooker attachment points as controlled components during sampling and packing approval.

Confirmed Product Information for 6024GD1JM

6024GD1JM is identified as a freestanding mixed-zone cooker with 3 gas burners + 1 electric hot plate. The supplied image shows a open floor rack with two lower shelves and a tall perforated rear panel, while the catalog lists the product size as 490 × 545 × 825 mm. The source weight entry is not repeated because it requires correction. The color box is listed as 528 × 215 × 560 mm. The packing statement is Support bracket: 660 × 300 × 130 mm, 10 sets (catalog note), with 1 unit per carton and a reference loading quantity of 919 pcs (40HQ reference). These figures help buyers conduct an initial model and logistics review; the concise specification table remains in the product summary above.

How This Model Compares Within the 6024 Series

Against D1J, GD1JM keeps the three-gas, one-hotplate layout but changes the upper structure from a solid hinged cover to a tall perforated panel. Against HD1J, it also has a different listed height and rear treatment. The better choice depends on the approved energy configuration, required format, destination rules and packing method—not on burner count alone.

Product Range and Buyer Search Context

Procurement teams may compare it with a perforated-back combination cooker, a three gas burner stand stove, or another mixed-zone floor cooker. The stand, shelves and rear structure must remain part of the comparison because they affect assembly, packaging and retail presentation. 6024GD1JM should be presented as a four-burner product because it provides four cooking positions. However, its listing must also state 3 gas burners + 1 electric hot plate so buyers can distinguish an all-gas cooker from a gas-electric combination stove before requesting a quotation.

Who Should Evaluate 6024GD1JM?

6024GD1JM is most relevant to importers and distributors assessing a complete cooker-and-stand package. It may also fit private-label programs where the assembled format, shelf arrangement and carton split are part of the range decision.

• Regional appliance distribution programs that can support both gas and electrical compliance requirements.
• Private-label assortments that need the exact gas-to-hotplate balance shown for this model.
• Wholesale projects where carton data, labels and manuals will be approved before production.

Suitability is conditional on the final gas, electrical, installation and compliance configuration for the destination market.

How Should Buyers Read the Packing Data?

The catalog gives a cooker color-box size, a separate ten-set support-bracket package, one piece per carton, and a 40HQ reference quantity. However, the printed net/gross weight line appears inconsistent, so weight is intentionally omitted from this product page pending confirmation. Reference loading quantities are catalog planning figures, not a freight guarantee. Final booking should use the approved production pack-out, shipment ratio and logistics provider calculation.

অর্ডার করার আগে ক্রেতাদের যা যাচাই করা উচিত

1. Obtain a corrected net and gross weight statement before freight costing.
2. Check panel protection and attachment hardware in the final packing drawing.
3. Confirm the electric hot plate rating and all destination-specific gas values.
4. Confirm voltage, frequency, plug or cord format and the rated input of each electric hot plate.
5. State the destination market and identify the required product, label, manual and packaging compliance documents.
6. Approve a production-representative sample before final artwork and mass production.

নমুনা অনুমোদন চেকলিস্ট

Before mass production, the buyer should review a sample built to the proposed order specification. The review should record measurable acceptance points rather than rely only on appearance.

• Assembled height, level and stability on a flat surface
• Frame alignment, shelf fit, feet and fastener count
• Attachment between the cooker body and stand
• Rear guard, cover or panel fit and finish
• Control movement and correspondence with each cooking position
• রেটিং-লেবেল ডেটা এবং সতর্কতা স্থাপন
• Production-style carton contents and assembly manual

RFQ Checklist for 6024GD1JM

A useful quotation request should define the product revision as well as the quantity. Send the following details so ECOBRIDGE can review technical and commercial feasibility.

• Model and configuration: 6024GD1JM, 3 gas burners + 1 electric hot plate.
• লক্ষ্য বাজার: country, sales region and intended distribution channel.
• Required quantity: trial order quantity and expected repeat-order volume.
• গ্যাসের প্রয়োজনীয়তা: gas family, nominal pressure, connection and requested burner ratings.
• Electrical requirement: voltage, frequency, plug or cord format and hotplate input.
• অনুপালন সংক্ষিপ্ত বিবরণ: applicable destination documents, testing or labeling requirements.
• Branding scope: logo, rating label, control graphics, language and manual requirements.
• Packaging brief: carton artwork, protection method, shipping marks and pack-out approval.
• Trade information: delivery port, requested commercial terms and target schedule.

গুণগত-নিয়ন্ত্রণ বিবেচ্য বিষয়সমূহ

Typical inspection points for this configuration may include gas leakage, burner fitting, flame stability under the specified gas conditions, electric hotplate operation at the approved electrical rating, control correspondence, surface inspection and protective packing. The actual inspection plan, sampling level and acceptance criteria should be agreed for the order rather than inferred from this product page. For stand models, the buyer should also define assembly and stability checks. For every version, test conditions must match the approved gas and electrical specification.

OEM and Private-Label Project Scope

For an OEM or ODM enquiry, buyers can ask ECOBRIDGE to evaluate logo placement, control-panel graphics, rating labels, instructions, carton printing, frame finish, hardware presentation and assembly documentation. Availability depends on the selected production configuration, order requirements, technical review and project feasibility. Private-label approval should link one model code to one controlled specification. Product photos, the sample, bill of materials, rating label, manual and carton should all describe the same 3 gas burners + 1 electric hot plate version.

RFQ-এর সময় নিশ্চিত করা হবে

Confirm corrected net and gross weights, complete packed-set dimensions, stand and panel hardware, voltage, frequency, plug, hotplate input, gas family, pressure, burner outputs, ignition, inlet, and safety devices. Do not use the catalog weight line for freight booking until a corrected sheet is issued. No certification, market approval, performance value or unrestricted operating environment is claimed until supporting documents for the ordered configuration have been reviewed.

Related Sourcing Resources

• চার বার্নারের গ্যাস স্টোভ রেঞ্জ
• ওইএম গ্যাস চুলার উৎপাদন প্রক্রিয়া
• গ্যাস স্টোভের গুণগত-নিয়ন্ত্রণ নির্দেশিকা

For an EU destination, buyers can consult গ্যাসীয় জ্বালানি দহনকারী যন্ত্রপাতি সম্পর্কিত প্রবিধান (ইইউ) ২০১৬/৪২৬ as an authority source. This reference does not state that 6024GD1JM is certified or approved for the EU; applicable requirements and evidence remain to be confirmed for the ordered version.

6024GD1JM Buyer FAQ

Why is the published weight omitted?

The supplied catalog weight line appears inconsistent, so this page does not convert it into a procurement claim.

What makes GD1JM different from D1J?

Both show three gas burners and one electric hot plate, but GD1JM uses a tall perforated rear panel rather than a full solid cover.

What packaging evidence is still needed?

Buyers need the corrected weights, a complete packed-set drawing and a quantity relationship between cooker cartons and ten-set bracket packs.

What defines the 4 burner cooker with stand and hot plate?

6024GD1JM is defined by four visible cooking positions arranged as 3 gas burners + 1 electric hot plate, together with its open floor rack with two lower shelves and a tall perforated rear panel. This phrase identifies the product format and visible energy layout; it does not establish unconfirmed burner output, gas compatibility, electrical rating, certification or installation approval. Those details must be specified and verified for the order.

Can the electrical and gas configuration be selected for a destination market?

The required voltage, frequency, plug or cord, hotplate input, gas family, pressure and connection should be stated in the RFQ. ECOBRIDGE must review feasibility and confirm the exact production specification. The visible four-position arrangement does not prove that every electrical or gas option is available.

Is OEM or private-label supply automatically included?

No. Buyers may submit logo, label, manual, control-panel and carton requirements for project evaluation. Approval depends on the selected configuration, technical feasibility, commercial terms and sample confirmation. Do not release retail artwork until one controlled model specification has been agreed.

Request a Configuration-Based Quote for 6024GD1JM

Ask for a 6024GD1JM quotation only after stating the panel version, electrical standard, gas configuration, quantity and required packing documents. Request a quote from ECOBRIDGE and reference model 6024GD1JM.